TriggerTech

Starting at $189.99

Starting at

$249.99

BREDA B12i

COMPETITION SHOTGUN

COPPERHEAD

Beauty & performance

BlackDiamond G2 COMPETITION ENHANCED (BCG)

 

BlackDiamond G2 Competition Enhanced (BCG)

BlackDiamond is our best coating available.  Our proprietary DLC coating is slicker, harder and more wear resistant than any other coating we have found.    This steel bolt carrier weighs in at 6.9oz. It is our slickest (coefficient of friction - 0.01) coating.    Matched with our Enhanced Bolt made of Carpenter-158 steel you can be confident you have the very best.

Why choose BlackDiamond:

  • CATAGORICALLY THE BEST COATING USED TODAY
  • HIGHEST RELIABILITY IN DRY OPERATIONS
  • COATING CREATES A SMOOTH AND STABLE PLATFORM
  • LESS RECOIL - GREATER ACCURACY
  • INCREASED WEAR RESISTANT
  • FASTER CYCLE RATE
  • EASIER TO CLEAN
  • HARDER:  3000 VICKERS
  • SLICKER:  COEFFICIENT OF FRICTION 0.01

Caution: (SLIPPERY WHEN DRY) 

Competition Bolt Carrier Groups MUST be used with a reduced recoil system designed for light weight carriers.

*Iron City Rifle Works HIGHLY recommends using an adjustable gas system and the TACCOM reduced recoil buffer and spring for best results.

RANGER GREY TACTICAL ADVANTAGE BCG

RANGER GREY TACTICAL ADVANTAGE BCG

Ranger Grey is new coating developed for Military and Law Enforcement special units.  This coating is by far the best coating ever used on a tactical BCG ever!  NanoComposite PVD technology.  During testing we achieved competition like performance with AK47 reliability.  RANGER GREY IS SIMPLY THE BEST TACTICAL BCG THAT HAS EVER BEEN AVAILABLE TO THE GENERAL PUBLIC. 

COPPERHEAD ENHANCED (BCG) G2 COMPETITION BOLT CARRIER GROUP

CopperHead Enhanced G2 Competition bolt carrier group.

CopperHead is the (PVD) (TiCN) and  with a coefficient of friction - 0.2. Our Enhanced matching bolt is constructed of Carpenter 158 steel and includes the enhanced reliability kit.  CopperHead is our hardest & slickest (PVD) coating.

Why choose CopperHead:

FEATURING FORWARD ASSIST

CARRIER WEIGHT ONLY 6.9oz

BCG WEIGHTING ONLY 8.8oz

LESS FELT RECOIL

INCREASED WEAR RESISTANCE

INCREASED CYCLE RATE

EASE OF CLEANING

IMPROVED RELIABILILTY

3200 VICKERS

COEFFICIENT OF FRICTION 0.2

EXCELLENT CHEMICAL & CORROSION RESISTANCE

HIGH RELIABILITY IN DRY OPERATIONS

Competition Bolt Carrier Groups MUST be used with a reduced recoil system designed for light weight carriers.

*Iron City Rifle Works HIGHLY recommends using an adjustable gas system and the TACCOM reduced recoil buffer and spring for best results.

C4V Tactical Advantage BCG

 

C4V Tactical Advantage BCG

The C4V coating has been so popular we had to include it on our TACTICAL ADVANTAGE BCG.

C4V (TiN) provides excellent wear resistance with a hardness of 2600 Vickers. C4V is a (PVD) coating (TiN), however one look at C4V and you will know this is not your average TiN. It has a coefficient of friction 0.4 and only 2 microns thick making it a major improvement over MilSpec. Our Enhanced Bolt made of Carpenter 158 is coated to match.

 
 

EVO Tactical Advantage BCG (NiB) EXO

IN STOCK AND READY TO SHIP

EVO Tactical Advantage BCG (NiB) EXO

The Tactical Advantage Line of products was created for use in real world applications without all the disadvantages of MILSPEC. The EVO coating is the same gen 2 NiB EXO coating used on our Competition Series BCG.

The NiB(EXO) coating is twice as durable as traditional NiB and has a coefficient of friction of 0.08. Unlike traditional NiB the EXO has the appearance of chrome and is even easier to clean.

AR-15 TITANIUM TAKEDOWN PIN SET

Color
Polished Titanium Silver
C4V Gold
Ranger Gray

Iron City Rifle Works AR-15 Titanium Takedown Pin Set are made of high strength titanium for weight reduction and corrosion resistance. Compatible with all milspec lower receivers.

  • Precision CNC machined out of Ti-6Al-4V (structural aircraft grade 5 titanium).
  • 50% lighter than mil-spec pins
  • Compatible with AR-15 .250" diameter pivot and takedown holes.
  • Polished titanium silver
 

COMPETITION AR-15 REDUCED RECOIL SPRINGS

Type

Reduce your overall recoil, and muzzle flip of your AR-15 with our Enhanced Carbine & Rifle Competition Recoil Spring.

A MUST HAVE WITH ANY LOW MASS BCG.

Our recoil spring has a 10% reduced power rating. It will aid in reducing muzzle flip and dip as it will reduce the speed of the BCG as it goes back into battery.

Made to mil Spec with one exception..... our spring is made from corrosion resistant stainless steel.


Recommended for use with low recoil buffer, adjustable gas system and any of our G2 Competition bolt carrier groups.



COATED TITANIUM FIRING PIN

Color
Gold
copper
gray
silver

IRON CITY RIFLE WORKS TITANIUM FIRING PINS

Available in C4V, CopperHead, RangerGray or Raw Titanium 

Why choose a CopperHead Coated Titanium Firing Pin:

45% LIGHTER THAN MILSPEC

FASTER DOUBLE TAPS

HARDER/STRONGER

OUR  COATINGS MAKES CLEANING INCREDIBLY FAST & EASY!!

THE ULTIMATE UPGRADE TO ANY BCG

Best price we have seen anywhere!

 

M67 ORIGINAL STONER AR15 Firing Pin Retaining Pin (2 Pack)

 M67 ORIGINAL STONER  Retaining Pin

This is the retaining pin used in Stoner's original design. It was replaced by the U.S. Military as a cost cutting measure.  Manufactured from 1018 steel the M67 pin is much stronger than the average cotter pin.  Parkarized finish, Made in the USA

This is the best price I have seen on the M67 pins anywhere!

 

C4V G2 COMPETITION ENHANCED (BCG)

C4V G2 COMPETITION ENHANCED (BCG)

C4V (TiN) provides excellent wear resistance with a hardness of 2600 Vickers.  C4V is a (PVD) coating (TiN), however one look at C4V and you will know this is not your average TiN.  It has a coefficient of friction 0.4 and only 2 microns thick making it a major improvement  over MilSpec.  Our Enhanced Bolt made of Carpenter 158 is coated to match.  Our G2 carrier weighs only 6.8oz

Why choose C4V:

  • FEATURING FORWARD ASSIST
  • G2 CARRIER WEIGHT 6.8oz
  • LESS FELT RECOIL
  • INCREASED WEAR RESISTANT
  • FASTER CYCLE RATE
  • IMPROVED RELIABILITY
  • 2600 VICKERS
  • COEFFICIENT OF FRICTION 0.4

Competition Bolt Carrier Groups MUST be used with a reduced recoil system designed for light weight carriers.

*Iron City Rifle Works HIGHLY recommends using an adjustable gas system and the TACCOM reduced recoil buffer and spring for best results.

 

 

ICRW RED LOGO CHAMBER FLAGS (2)

2 ICRW reinforced red logo chamber flag.

EVO G2 COMPETITION ENHANCED (BCG)

 

EVO G2 Competition Bolt Carrier Group is not your average Nickle Boron this is the new patented EXO - NiB.  EXO IS TWICE as good in every category than traditional Nickel Boron.  EVO's coating is unmatched by any competing NiB technology.  Better heat resistance & Coefficient of Friction while remaining cost effective have made EVO our best selling Carrier to date.

The Competition  EVO has been designed to run in AR15 configurations using a gas tube that is MID LENGTH OR LONGER and a REDUCED RECOIL SYSTEM.  The milspec buffer and spring are designed to be used with heavy standard BCG's & will cause damage to you bolt and/or carrier.  However, by adding an adjustable gas system, the Taccom recoil buffer, and Enhanced reduced power spring, overall recoil is significantly reduced.  The  NiB(EXO) coating is twice as durable and has a coefficient of friction of 0.08.  Unlike traditional NiB the EXO has the appearance of chrome and is even easier to clean.  All Iron City Rifle Works bolt carriers feature forward assist while remaining light weight.  Our EVO (BCG) is paired with our matching Carpender-158 Enhancd Bolt.  We finished it off by adding our Enhanced Reliability kit giving you a BCG that can handle the most extreme environments. 

Competition Bolt Carrier Groups MUST be used with a reduced recoil system designed for light weight carriers.

*Iron City Rifle Works HIGHLY recommends using an adjustable gas system and the TACCOM reduced recoil buffer and spring for best results.

 

ENHANCED C-158 BOLT

Style